Back
Home » Our Products » Ecomed Oxigen

Ecomed Oxigen

HYDROGEN PEROXIDE

Biodegradable descaler for cleaning irrigation installations: pipes, drippers, sprinklers, etc. The solution, without additives, eliminates all organic elements produced in the installations (algae, biofilm, etc.).

Further benefits:

  • It does not generate waste.

  • It prevents obstructions in irrigation facilities.

  • It eliminates and decomposes algae in the interior of pipes and drips.

  • It provides oxygen to the radicular system.

Suitable for organic farming. 

Ecomed Oxigen - Medifer

100% Biodegradable discaler.

I am interested
Technical data sheet
Brochure

Relevant information

Type of product

Liquid
Application mode

Fertigation and spray irrigation
Packaging

20 L – IBC – Tanker

Chemical properties

Hydrogen peroxide 50 %

Guidance dose

Periodic cleaning treatment:

  1. Add between 250 ml and 750 ml (depending on the degree of clogging) per cubic metre of water in the dripper line feed tank.
  2. Keep the irrigation system running for as long as it takes for the water containing the product to reach the last dripper.
  3. Once it has reached the last dripper, stop the pump and leave the dripper lines charged with the product for 8-24 hours, depending on the degree of clogging. On average, 12 hours is sufficient.
  4. Open the network ends and start the pumps in order to remove the remains of limescale, mud, particles, etc. Ideally, start by opening the ends of the main pipes, then the secondary and tertiary pipes, and finally the ends of the drip lines.
  5. Hold for 30 minutes or until the water comes out clean.

Treatment in case of severe blockages:

In case of severe obstructions or for start-up after major stops in the installation, we recommend following the above procedure, adding 1 litre of product per cubic metre of water and leaving it to act in the pipes for 24 hours.

If you have any questions, please consult our agronomists.

Related products